Features:

The world's first FOC brushless system for Rock Crawler. Field-Oriented Control for super linearity, high torque, and extreme silence.

The chip-type magnetic encoder inside the motor ensures consistency between the signals of the three phases and always outputs pure and accurate signals indicating the rotor position.

The waterproof and dust-proof design (*IP67 standards) allows the AXE brushless power system to be used in all weather and track conditions without any issues of damage caused to the system by water or dust. Damage to the vehicle caused by water, mud, or adverse conditions should be closely monitored when driving in muddy, wet, or adverse conditions.

Intelligent torque output and speed closed-loop control for easy control and constant motor RPM under all loads.

The adjustable drag brake and drag brake rate control, with a maximum drag brake of up to 200% (almost double the drag brake of standard brushless power systems), can provide unprecedented parking capacity on slopes, with no jerky stops.

The innovative built-in Bluetooth connectivity allows users to read ESC data or update ESC firmware via a smartphone (installed with the HW LINK app).

The motor with 4 poles and 12 magnets, featuring Hobbywing's "staggered pole" patent, has zero cogging effect and torque ripple. It can work smoothly at low speeds. This greatly improves the maneuverability of rock crawlers at low speeds.

The sensor harness, featuring the plug-and-screw design, has a silicone O-ring inside. The design and O-ring not only provide a firm connection between the motor and the ESC but also solve the "waterproof" challenge for sensor ports.

The advanced and secure electronic switch features a waterproof, dust-proof, and shock-resistant design.

Multiple protections: low-voltage cutoff, thermal, fail-safe (throttle signal loss), motor lock-up, and overcurrent.

NOTE: The Xerun AXE series is a closed system. Due to its advanced technology, HOBBYWING Xerun AXE ESC works exclusively with the Xerun AXE brushless motor.

Specifications:

XERUN AXE R2 FOC ESC:

Continuous/Peak Current: 80A/480A

Input Voltage: 2-3S LiPo, 6-9S NiMh

BEC Output: 6V/7.4V switchable, continuous current of 6A (switching mode)

Input Wires: Red-Black-12AWG-200mm

Input Connector: XT60

Programming Port: Built-in Bluetooth

Firmware: iOS or Android smartphone (installed with the HW LINK app)

Size/Weight: 47.4 (L) x36.2 (W) x26.5 (H) mm/ 108g (including input wires)

Motor XERUN AXE 540L:

Type: 1/10-1/8 FOC brushless motor (Patented)

Waterproof: Yes

Motor Diameter: 36.0mm (1.42in)

Length: 57.8mm (2.28in)

Shaft Diameter: 3.175mm (0.125in)

Pole: 4

Kv: 2100Kv

Input Voltage: 2-3S

No-load Current: 2.7A

Weight: 212g